Free Pattern – Chunky Cable Knit Hat (Revised)



About a year ago, I posted this free pattern for a chunky cable knit hat. Just in time for the winter, I've updated the instructions, worked out some kinks and created a large size hat as well. So, if you've been afraid of knitting cables, it's time to give it a shot. They're not that hard to do and look so very impressive. This pattern is knit flat and then sewn together. It knits up pretty quickly in just a few hours so you can make one for yourself and everyone in the family. 

Disclaimer: This is a somewhat tested and definitely not perfect pattern. I do not guarantee that it will work for all knitters.

Chunky Cable Knit Hat Free Pattern

Gauge: 
4 inches = 9.5 sts and 12 rows

Supplies:
1 skein Lion Brand Wool-Ease Thick & Quick or equivalent (For the blue hat I used Lion Brand Hometown USA)
US size 13 straight needing needles

SMALL SIZE (Finished Circumference = 20 inches)

Cast on 48 stitches.

Make a knit 2, purl 2 rib for 6 rows.

Six Stitch Cable Pattern
Row 1: (RS) *p1, k6, p1* Repeat to end of row.
Row 2: *k1, p6, k1* Repeat to end of row.
Repeat rows 1 and 2 one time.
Row 5: (RS) *p1, slip 3 sts to cable needle and hold in front, k3, knit 3 sts from cable needle, p1* repeat to end.
Row 6:  *k1, p6, k1* Repeat to end of row.

Repeat Cable Pattern 1 time.

Begin to shape crown.

Row 1: (RS) *p1, k6, p1* Repeat to end of row.
Row 2: *k1, p6, k1* Repeat to end of row.
Repeat rows 1 and 2 one time.
Row 5 – 1st Decrease Row: (RS) *p1, sl2 to cable needle, k2tog, k2, knit 2 sts from cable needle, p1* repeat to end
Row 6:  *k1, p5, k1* Repeat to end of row.
Row 7 – 2nd Decrease Row: (RS) *p1, k2tog, k1, k2tog, p1*, repeat to end
Row 8: (WS) *k1, p3, k1*, repeat to end
Row 9 – 5th Decrease Row: (RS) p1, *sl1, k2tog, psso, p2tog*, end sl1, k2tog, psso, p1.
Row 10 – 6th Decrease Row: (WS) p2tog 6 times, k1

Cut yarn about 20 inches long and thread on needle. Run needle through live stitches and pull tight. Sew up side seam.

LARGE SIZE (Finished Circumference = 22 inches)

Cast on 54 stitches.

Make a knit 2, purl 2 rib for 8 rows.

Six Stitch Cable Pattern
Row 1: (RS) *p2, k6, p1* Repeat to end of row.
Row 2: *k1, p6, k2* Repeat to end of row.
Repeat rows 1 and 2 one time.
Row 5: (RS) *p1, slip 3 sts to cable needle and hold in front, k3, knit 3 sts from cable needle, p1* repeat to end.
Row 6:  *k1, p6, k2* Repeat to end of row.

Repeat Cable Pattern 1 time.

Begin to shape crown.

Row 1: (RS) *p2, k6, p1* Repeat to end of row.
Row 2: *k1, p6, k2* Repeat to end of row.
Repeat rows 1 and 2 one time.
Row 5 – 1st Decrease Row: (RS) *p2, sl2 to cable needle, k2tog, k2, knit 2 sts from cable needle, p1* repeat to end
Row 6:  *k1, p5, k2* Repeat to end of row.
Row 7 – 2nd Decrease Row: (RS) *p2, k2tog, k1, k2tog, p1*, repeat to end
Row 8: (WS) *k1, p3, k2*, repeat to end
Row 9 (3rd Decrease Row): (RS) *p2tog, sl1, k2tog, psso, p1*
Row 10 (4th Decrease Row): (WS) p2tog 9X times

Cut yarn about 20 inches long and thread on needle. Run needle through live stitches and pull tight. Sew up side seam.



Related:
Knitting posts

--
Follow along with me here:

19 comments:

  1. Thanks for sharing! I love how funky this pattern looks. Can't wait to try it!

    ReplyDelete
  2. Love the looks of this! Been looking for a nice cable hat to make for Christmas. From the picture, it doesn't seem to be a very long hat. Can you tell me what the finished length would be on the adult hat pattern? Thx so much!!

    ReplyDelete
  3. I think there might be a mistake in the pattern for the large hat; for k2p2 rib, you need a multiple of four stitches. I think the pattern should be adjusted so that you cast on 56 stitches and then adjust pattern as necessary. :)

    ReplyDelete
  4. Hi Lula,

    What a cute project! I love it so much that I decided to feature it in our roundup of cozy handmade hats! Check it out here: http://www.favecraftsblog.com/diy-winter-hats/

    Have a great day!

    ReplyDelete
  5. Hi Lula,

    OMG...I am on grown 5 of the 1st round for the cable pattern...I originally casted on 54 stitches....I dont have enough stitches to complete last cable. How can I fix this so I can continue my hat for my daughter...please forward response to tmkblvd@aol.com

    ReplyDelete
  6. Shame on me for not paying attention to the ribbing, "Make a knit 2, purl 2 rib for 8 rows." For those who may have done what I did aka day dreaming with reading a pattern, you start the rib on the RS K2, P2 so row 2 is reverse P2, K2 to the end, then back to K2, P2 for row 3. flip flop this to complete the 8 rows. If you don't it won't rib & you'll just have a pretty bumpy look.

    Row 5 is goofy: "Row 5: (RS) *p1, slip 3 sts to cable needle and hold in front, k3, knit 3 sts from cable needle, p1* repeat to end." There isn't enough sts so I just fudged a little and for the last 6 sts I P1, slipped 3 to the needle, K1, K3 from the needle P1. It remains to be seen how this will work out hehe!

    So far so good though, just keep knitting, just keep knitting! :)

    ReplyDelete
    Replies
    1. Did you have to make any more adjustments for the rest of the pattern? How did it turn out?

      Delete
  7. I think row 5 is a little missed up I did p2, slip 3, instead of p1 slip3. So far so good

    ReplyDelete
  8. Yes, unfortunatley, after my 3rd go at the large size something is not right. I'm not experienced enough to figure out the issue. It seems to be happening in row 5 of the cabled pattern. Help!!

    ReplyDelete
    Replies
    1. In row 5, I think you need to *p2, slip 3 sts to cable needle and hold in front, k3, knit 3 sts from cable needle, p1* repeat to end.

      The difference there is p2 NOT p1 at the beginning.

      Everything else should work fine!

      Delete
  9. I think for the large hat, cable section row 5, the first P1 stitch just needs to be P2 and then slip 3. The 54 cast on stitches work just fine. Very happy with how it's shaping up! Thanks for the great pattern!

    ReplyDelete
  10. May I suggest that the pattern be changed as follows:\rows 1-8 should be *k2, p2* repeat to end
    Six stitch cable rows 1 & 3 should be *p1, k6, p1* repeat to end. Rows 2 & 4 should be *k1, p6, k1* repteat to end. Row5 should be (RS) *p1, slip 3 sts to cable needle anbd hold in front (C6F), k3, knit 3 sts from cable, p1, repeat to end. Wherever it's a k2 or p2 should be k1 & p1. Hope this helps other knitters.

    ReplyDelete
  11. I just posted a comment about the chunky knit hat and need to give more info - this is for the adult hat and you need 56 sts not 54. Sorry ;(

    ReplyDelete
  12. Thanks for the pattern. Can I confirm something please? On the cable pattern row one is it p2 k6 p1. Then do you repeat the whole p2 k6 p1 or just repeat k6 p1 or just repeat p2 k6?

    Thanks very much!

    ReplyDelete
  13. Love this pattern, made the small size and this would fit a child. Next time I will make a large size. Very easy and fun to make!!!

    ReplyDelete
  14. I made adjustments to cable by Following Verplow. It fixed my cable issue but my hat turned out very small like a child's hat

    ReplyDelete
  15. I did the first pattern and it is not even big enough for my 10 month old baby. it turned out nice. I am going to end up giving it to my sister who is due to have her baby soon.

    ReplyDelete
  16. Hey guys! for those of you who dont understand the pattern for the LARGE SIZE, heres the new one, with no mistakes:

    LARGE SIZE

    CAST ON 58 STITCHES. (remember not to use the border stitches)

    Make a knit 2, purl 2 rib for 8 rows.

    Six Stitch Cable Pattern
    Row 1: (RS) *p1, k6, p1* Repeat to end of row.
    Row 2: *k1, p6, k1* Repeat to end of row.
    Repeat rows 1 and 2 one time.
    Row 5: (RS) *p1, slip 3 sts to cable needle and hold in front, k3, knit 3 sts from cable needle, p1* repeat to end.
    Row 6: *k1, p6, k1* Repeat to end of row.

    REPEAT CABLE PATTERN 3 TIMES TOTAL.

    Begin to shape crown.

    Row 1: (RS) *p1, k6, p1* Repeat to end of row.
    Row 2: *k1, p6, k1* Repeat to end of row.
    Repeat rows 1 and 2 one time.
    Row 5 – 1st Decrease Row: (RS) *p1, sl2 to cable needle, k2tog, k2, knit 2 sts from cable needle, p1* repeat to end
    Row 6: *k1, p5, k1* Repeat to end of row.
    Row 7 – 2nd Decrease Row: (RS) *p1, k2tog, k1, k2tog, p1*, repeat to end
    Row 8: (WS) *k1, p3, k1*, repeat to end
    Row 9 3rd Decrease Row: (RS) *p2tog, sl1, k2tog, psso, p1*
    Row 10 – 4th Decrease Row: (WS) p1, *sl1, k2tog, psso, p2tog*, end sl1, k2tog, psso, p1.
    Row 11 – 5th Decrease Row: (RS) p2tog 6 times, k1
    Row 12 – 6th Decrease Row: (WS) p2tog whats left.


    Cut yarn about 20 inches long and thread on needle. Run needle through live stitches and pull tight. Sew up side seam.

    ReplyDelete

Thank you for visiting my blog! I love getting comments and always visit links when available.

Note: Only a member of this blog may post a comment.